3. Equipment Process Characteristics

The whole process of filtration, washing and drying is completed continuously in the same container.
a. Filtration: operate under vacuum to achieve solid-liquid separation. During filtration, the filter cake is flat, and the solid-liquid separation effect is good.
b. Washing: There is a 360° rotating spray device on the inside of the container, so that the cleaning (washing) liquid is evenly distributed in the container, which can realize the cleaning inside the container and the paddle washing of materials, and the filter cake and the washing liquid are mixed by stirring the lifting paddle. , so that the slurry crystal and filter cake can be fully washed.
c. Drying: The filter cake is loosened layer by layer by the stirring blade, the heating device of the equipment evenly heats the filter cake, and the wet material is heated with hot gas in a vacuum state to accelerate the evaporation and achieve the purpose of drying.
d. Unloading: Scrape and loosen the material, and push it through the stirring blade to automatically unload the material from the discharge port on the side of the tank wall.

4. Parameter Table