Welcome to Jiangsu Xingxing Drying Equipment Co., Ltd.
中文版  |  English
zar.dangxian@jxxcn.com
 Home > Products > Drying Equipment Series
PRODUCT CENTER
Contact Us
  • Tel: 0086-519-88903988
  • Fax: 0086-519-88902512
  • E-mail: zar.dangxian@jxxcn.com
  • Add: Jiaoxi Industrial Park, Tianning District, Changzhou City.
  • YCT series throughflow hot air circulation oven
    • E-mail: zar.dangxian@jxxcn.com
    • Share:
    • Inquiry Now
    • Product Introduction:
      The fresh air is sucked through fan and then filterd through primary,secondary and high efficiency. Therefore the purification reaches to one hundred thousand grades. Through steam...
      • YCT series throughflow hot air circulation oven
      • YCT series throughflow hot air circulation oven
      • YCT series throughflow hot air circulation oven
    • Product Details

    Principle of work

    The air steam passes through the surface of raw material only in traditional level chamber drier,The disadvantage is that the coefficient of heat transfer is low and the utilization factor is poor and the drying time so long. Moreover because Of the defect of structure,it can not be in conformity with the requirements ofGMP,In order to overcome the shortcoming,we designed and developed the penetrating air stream box type drier on the basis of absorbing abroad advanced technology.The principle of work is shown in the figure listed below:

    1.jpg 2.jpg

    The fresh air is sucked through fan and then filterd through primary,secondary and high efficiency. Therefore the purification reaches to one hundred thousand grades. Through steam heat exchanger,the temperature of air is raised to certain temperature. The heated air is purified through filter again and then flows to every layer through left glow divider. It makes the hot air pass through the raw material to be dried evenly. The damp air is sucked from the inclined air channel under the drying tray. Pans of damp air are exhausted out off the oven through centrifuge fan and the other is circled and heated still. In this way the purpose can be realized.



    Features

    1.Because the hot air of each circle is filtered through sub-high or high efficiency filter, it can avoid effectively that the carried raw material in the air is deteriouated and polluted during the period of re-circle and re-heating. It is in conformity with the requirements of GMPfully.

    2.Compared with laminar flow type oventhe dry capacity is higher. The thickness of raw material to be dried is more than three times

    3. The dry area is large and the efficiency is highCompared with level flow type oventhe capacity is more than 3-6 times. The cost is lower.

    4.It is suitable for all kinds of raw materials having the shape of granule of block drying.

    5.It is easy in operation and quick in clean and exchange and low in trouble.

    6.There are air filters at inlet and outlet. The raw material to be dried can not be polluted and the quality of raw materials to be dried can not be damaged.

    7.The heat source may be steam or electric heater.


    Technical parameters


    ModelSize

    Dry amount each time (kg)

    Equipped power(KW)

    Steam consume

    Area of heat(m²)

    Amount of air m³/h

    Temperature difference between up and low℃

    Size of drying tray

    Quantity of drying tray

    Weight(kg)

    Overall dimensions

    YCT-C-I

    100

    4

    40-80

    50

    4000-7300

    ±2

    550×610×80

    10

    2200

    2350×1400×2280

    YCT-C-II

    200

    7.5

    80-120

    80

    7200-15800

    ±2

    530×610×80

    20

    4000

    3100×1600×2700


    Remarks:all equipments are continually improved. Select equipment(s)shall be subject to the latest information.

    Immediately Consult
    Message *
    Name *
    Phone
    Email *
    Verification code *
    • Other Products
    • New Products