RLY series oil fired hot air stove

Working principle

The fuel is burned through a burner to produce high-temperature gas. And with the help of a hot air stove with enhanced heat exchange measures, the heat of high-temperature gas is transmitted to the heated air. After the heat is dissipated, the temperature of high-temperature gas decreases to 250 ℃ and is discharged into the atmosphere. The air that needs to be heated is forced into the hot air stove through the optional blower, and after absorbing heat, the temperature rises to the rated value and is sent out from the hot air outlet. When the hot air temperature reaches the upper limit of the rated temperature, the burner will automatically stop combustion or switch to small flame combustion. When the hot air temperature drops to the lower limit of the rated temperature, the burner will ignite again or switch to high flame combustion. The heating speed can be adjusted by adjusting the opening of the inlet valve.

Technical specifications

model	Burner model	fuel quantity kg/h	Heating capacity 104kcal/h	Boundary dimension L × W × Hmm	Hot air outlet L × Wmm	Total weight kg
RLY1	RIELLO.G3/DL3FS	1.3-1.6	1	1200×1200×1600	Φ200	460
RLY4	RIELLO.G10/DL10FS	5-6.5	4	1700×1300×1600	Φ250	850
RLY10	RIELLO.G20/DL23FS	13-16	10	2300×1568×1870	Φ300	2200
RLY20	RIELLO 1G/DL34FS	26-32	20	2800×1568×1870	Φ400	2670
RLY30	RL50/DL55FT	39-48	30	3400×1568×1870	Φ450	3060
RLY40	RL70/DL75FT	52-64	40	4440×1768×2070	Φ550	5600
RLY60	RL100/DL100FT	78-96	60	5140×1868×2070	Φ600	8460
RLY100	PRESS 4G/DL 120FT	130-140	100	6440×2480×2300	550×600	12800
RLY160	P300/DL250FT	200-270	160	7470×2920×3480	750×900	15780
RLY200	P300/DL300FT	260-300	200	8175×2920×3480	750×900	18500
RLY360	G1510	480-620	360	9300×2920×3480		21000